YGM High Pressure Suspension Mill is a new type of grinding equipment developed by our chief engineer on the basis of years of experience in fine powder making and processing, with high efficiency and low energy consumption. It is suitable for grinding barite, limestone, slag and other non-flammable and explosive materials of mining, metallurgy, chemical industry, building materials and other industries with Mohs hardness not more than 9.3 grade and humidity below 6%, and the granularity of finished products can be adjusted from 80 to 425 mesh. It can also produce 30-80 mesh coarse powder by adding special devices.
YGM High Pressure Suspension Mill, the grinding roller assembly is suspended on the grinding roller hanger through the cross-stretcher shaft, and the grinding roller hanger is fixedly connected with the main shaft and the shovel frame, the pressure spring is pressed on the outer end of the cantilever of the grinding roller bearing chamber, and the grinding roller is forced to be pressed on the inner circle surface of the grinding ring with the cross-stretcher shaft as the pivot point. At the same time, the grinding roller rotates around its own axis. The higher the rotation speed of the impeller, the finer the powder will be. For the mill to work under negative pressure, the increased air flow is discharged into the bag filter through the residual air pipe between the fan and the main engine, which is purified and then discharged into the atmosphere.
YGM High Pressure Suspension Mill, wind-selected airflow is in the fan – mill shell – cyclone separator – fan circulation flow operation, so less dust than high-speed centrifugal crusher, clean operation workshop, pollution-free environment.
For more information about crushers and mills, please contact us now, WhatsApp is recommended, and we look forward to hearing from you.