MW ultrafine micro powder mill is a kind of processing equipment for fine and ultra-fine powder. This micro powder mill is mainly suitable for non-flammable and explosive non-metallic materials with medium and low hardness, humidity less than 6% and Mohs hardness below 9. It is a new type of mill developed and manufactured for the production of ultra-fine powder after more than 20 trials and improvements, with fineness up to 0.006mm. The equipment is equipped with high efficiency pulse dust collector and muffler, which can reduce dust and noise. And the whole production will not have any impact on the environment.
MW ultrafine micro powder mill with low investment cost. With the same product fineness and generator power, it has less investment, lower cost, shorter recovery cycle and more than double output than airflow mill, stirred mill and ball mill. With the same fineness of the finished product and power consumption, the output is more than 45% higher than that of airflow mill and stirred mill. Compared with ordinary mills, this ultra-fine mill has no rolling bearings and screws in the grinding chamber, so there is no problem of easy loss of bearings and other seals, and avoids the problem of screws easily loosening and destroying the machine.
MW ultrafine micro powder mill, the working principle is that the motor drives the main shaft and each turntable through the reducer, and the reducer drives dozens of rollers to rotate against the raceway of the ring through the pin, which conveys small materials from the elevator to the hopper, and then the vibrating feeder feeds the materials evenly into the center part of the upper turntable. The material falls down into a circle under the action of centrifugal force and falls onto the raceway of the ring to be crushed into powder.
Get more information about the equipment, or you want to know more about the equipment of crusher mill, please contact us immediately, we will provide you with detailed information about the equipment.