What kind of equipment is used for pulverized coal for lime calcination in Indonesia?The general choice is Henan LBY Heavy Industry LM Vertical Mill.Henan LBY Heavy Industry develops and designs many kinds of grinding equipment, why must we choose LM Vertical Mill for pulverized coal for lime calcination?The reason is that there are 9 types of specialized equipment specially developed and designed for pulverized coal preparation in this type of LM Vertical Mill equipment.It can be widely used in coal powder boiler, blast furnace blowing, coal chemical industry, lime kiln, rotary kiln and electric power, cement and other industries.

What kind of equipment is used for pulverized coal for lime calcination in Indonesia?is a very common and difficult question to answer.Coal dust for lime calcination needs to meet the professional requirements of ash, volatile matter and moisture in order to calcine high quality calcium carbonate.High ash content will lead to sticky kiln and laps, low melting point (melting point needs to be greater than 1250°) has a corrosive effect on the kiln lining, and coal dust adhering to the product will reduce product quality.Volatile matter is good for coal powder ignition and stable combustion, but too high volatile matter will cause explosion, so it is best to control the volatile matter of coal powder between 32%-38%. If the moisture in pulverized coal is too high, it will reduce the combustibility of the fuel and affect the consumption of fuel.

Henan LBY Heavy Industry LM Vertical Mill has nine types of plants for pulverized coal preparation, namely LM880M, LM1150M, LM1300M, LM1500M, LM1700M, LM1900M, LM1900M, LM2400M and LM2800M.The feed size is between 20-50mm, the moisture of the incoming material must not be greater than 15%, and the finished product size obtained is R=0.08=5-20% (200 mesh, 80-95% passing), and the coal powder moisture ≤1%-5% between.If you want the output below 20T/H, you can choose the 4 models LM880M-LM1500M, and for the output requirement between 20-100T/H, you can choose the 5 models LM1700M–LM2800M.
What kind of equipment is used for pulverized coal for lime calcination in Indonesia?If you have the same questions, welcome to leave a message your needs and information, we will answer all your questions, look forward to your message, thank you for watching, wish you a happy life.